With Netatmo Valves, you always have the temperature in your home under control. You can use the Home App to control the room temperature from anywhere and adjust it if necessary. Furthermore, you can integrate your smart thermostats into different Home App scenes and rules.
For example, you can create a time rule that the heating in your bedroom goes down to your desired temperature at your bedtime or that your bathroom is nice and warm in the morning.
Requirements for using Netatmo Valves in the Home App:
-
Swisscom Internet Box with compatible firmware (min. 12.02.48)
-
The current version of the Home App (min. 11.19.0)
Instructions for adding the Netatmo Valves:
-
Make sure the Netatmo Valves (and associated Netatmo Relay) are added and set up in the Netatmo Energy app
-
The Netatmo Relay should automatically appear as a new device at the top of the Smart Home section. Click on this device tile
(If the Relay does not automatically appear as a new device at the top of the "Smart Home" area: in the Swisscom Home app, scroll to the bottom of the "Smart Home" area and select "Add Device". Click on "Netatmo radiator thermostats" and select the option " Add Netatmo radiator thermostats". The Home app will now search your network for your Netatmo Valves)
-
Set up your Netatmo Valves in the settings according to your preferences and press "Done"
You have now successfully added your Netatmo Valves.
Do you see the Netatmo Relay device tile but adding fails?
- In the Netatmo Energy app, go to the device settings and select the relay
- Press "Rename Relay" and give the relay a name
- Go back to the Home app and add the Netatmo Relay as described above