To set up the Swisscom Smart Switch in the Home app, proceed as follows:

1. Power up your Swisscom Smart Switch near your Internet box and turn it on.
2. Open the Swisscom Home App
3. Go to the "Smart Home" section and press "Add Device" at the bottom of the page
4. Select the Swisscom Smart Switch and follow the instructions in the app

Note: If you have a Swisscom WLAN box in use, please refer to the following section.

You want to connect the Swisscom Smart Switch directly to the WLAN box? Then follow these steps:

1. Supply your Swisscom Smart Switch with power at the desired location and switch it on
2. Open the Swisscom Home App
3. Go to the "Smart Home" section and press "Add device" at the bottom of the page
4. Select the Swisscom Smart Switch and follow the instructions in the app
5. Once the Smart Switch is in pairing mode (LED flashing white) press the + button on your WLAN box.

Alternatively, you can pair near the Internet Box and place the Smart Switch near the WLAN Box afterwards without any further action.